# OBD-II C0044: Brake Pressure Sensor A

> **Quick Answer:** OBD-II fault code C0044 indicates Brake Pressure Sensor A. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $432–$2376.

- **URL:** https://faultcodes.org/automotive/obd2-c0044
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers brake pressure sensor A (sensor 1) in the ABS/ESC hydraulic unit, which measures master-cylinder or circuit brake pressure. The stability and brake modules use this reading to know how hard the driver is braking and to control traction, stability, brake assist and hill-hold. The module sets the code for a signal outside the valid range, an open or short, or a value that disagrees with pedal demand or a second pressure sensor. RAM assigns code C0044-01 to a general electrical failure of brake pressure sensor 1 on the 2024 2500; because the transducer sits inside the hydraulic control unit, the published repair replaces the whole integrated brake unit. A fault disables stability and assist functions and sets the ABS or brake warning lamp.

## Common Symptoms
- ABS or brake warning lamp on
- Stability and assist functions disabled
- Changed brake assist behaviour

## Most Likely Root Causes
- Pressure sensor failed or out of range
- Fault internal to the integrated brake unit
- Harness or connector fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Brake Pressure Sensor A.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Brake Pressure Sensor A.
5. Clear fault memory and run a verification cycle to confirm C0044 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $151–$998 | $432–$2376 |
| GBP | £119–£785 | £344–£1892 |
| CAD | CA$203–CA$1340 | CA$580–CA$3190 |
| EUR | €140–€924 | €400–€2200 |
| CHF | CHF 161–CHF 1063 | CHF 528–CHF 2904 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0044?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0044?
DIY replacement parts average $151–$998, while professional service averages $432–$2376.

### Will resetting C0044 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

