# OBD-II C001E: Right Rear Hydraulic Release Too Long

> **Quick Answer:** OBD-II fault code C001E indicates Right Rear Hydraulic Release Too Long. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1944.

- **URL:** https://faultcodes.org/automotive/obd2-c001e
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Set when the ABS modulator cannot release pressure at the right rear wheel within the expected time during a control cycle, completing the per-wheel set with C0012, C0016 and C001A. After commanding the right rear outlet valve to dump pressure the module expects wheel speed to recover and line pressure to fall; a release longer than the calibrated limit points to a sticking valve, a restricted hydraulic path or an accumulator or pump that cannot accept fluid. ABS and stability control are disabled and the ABS warning lamp is set. No manufacturer documents this code publicly; the release phase is covered by NHTSA's brake study, the accumulator limit by a patent on low-pressure accumulators.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Extended or firm pedal during hard braking

## Most Likely Root Causes
- Outlet valve sticking or slow
- Restricted hydraulic path or contaminated fluid
- Pump or accumulator cannot accept fluid

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Rr Abs Outlet Valve.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Rr Abs Outlet Valve.
5. Clear fault memory and run a verification cycle to confirm C001E does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $113–$816 | $324–$1944 |
| GBP | £89–£643 | £258–£1548 |
| CAD | CA$152–CA$1096 | CA$435–CA$2610 |
| EUR | €105–€756 | €300–€1800 |
| CHF | CHF 121–CHF 869 | CHF 396–CHF 2376 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C001E?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C001E?
DIY replacement parts average $113–$816, while professional service averages $324–$1944.

### Will resetting C001E fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

