# OBD-II C001C: Right Rear Inlet Control

> **Quick Answer:** OBD-II fault code C001C indicates Right Rear Inlet Control. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1836.

- **URL:** https://faultcodes.org/automotive/obd2-c001c
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers the right rear inlet (apply) solenoid valve of the ABS hydraulic modulator, the right rear counterpart of C0010 and C0018. The module closes this valve to isolate the right rear brake circuit and hold wheel pressure during ABS, traction or stability control, then opens it to reapply pressure; on the rear axle the same channel often supports electronic brake-force distribution. It monitors the coil for opens, shorts to supply or ground and resistance outside the calibrated range. A confirmed electrical fault disables ABS and stability control and lights the ABS warning lamp while base braking remains. No manufacturer documents this code publicly; the apply valve per wheel is described by NHTSA and in a pump patent.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Normal braking retained

## Most Likely Root Causes
- Inlet valve coil open or shorted
- Harness or connector corrosion
- Internal hydraulic modulator fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Rr Abs Inlet Valve.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Rr Abs Inlet Valve.
5. Clear fault memory and run a verification cycle to confirm C001C does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $113–$771 | $324–$1836 |
| GBP | £89–£607 | £258–£1462 |
| CAD | CA$152–CA$1035 | CA$435–CA$2465 |
| EUR | €105–€714 | €300–€1700 |
| CHF | CHF 121–CHF 821 | CHF 396–CHF 2244 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C001C?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C001C?
DIY replacement parts average $113–$771, while professional service averages $324–$1836.

### Will resetting C001C fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

