# OBD-II C001A: Left Rear Hydraulic Release Too Long

> **Quick Answer:** OBD-II fault code C001A indicates Left Rear Hydraulic Release Too Long. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1944.

- **URL:** https://faultcodes.org/automotive/obd2-c001a
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Set when the ABS modulator cannot release pressure at the left rear wheel within the expected time during a control cycle, the left rear equivalent of C0012 and C0016. After the module commands the left rear outlet valve to dump pressure it expects wheel speed to recover and line pressure to fall; a release that exceeds the calibrated time limit indicates a sticking valve, a restricted hydraulic path or an accumulator or pump unable to accept fluid. ABS and stability control are disabled and the ABS warning lamp is set. No manufacturer documents this code publicly; NHTSA's study covers the release step of the ABS cycle, and a patent shows how a full low-pressure accumulator slows it.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Extended or firm pedal during hard braking

## Most Likely Root Causes
- Outlet valve sticking or slow
- Restricted hydraulic path or contaminated fluid
- Pump or accumulator cannot accept fluid

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Lr Abs Outlet Valve.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Lr Abs Outlet Valve.
5. Clear fault memory and run a verification cycle to confirm C001A does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $113–$816 | $324–$1944 |
| GBP | £89–£643 | £258–£1548 |
| CAD | CA$152–CA$1096 | CA$435–CA$2610 |
| EUR | €105–€756 | €300–€1800 |
| CHF | CHF 121–CHF 869 | CHF 396–CHF 2376 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C001A?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C001A?
DIY replacement parts average $113–$816, while professional service averages $324–$1944.

### Will resetting C001A fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

