# OBD-II C0014: Right Front Inlet Control

> **Quick Answer:** OBD-II fault code C0014 indicates Right Front Inlet Control. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1836.

- **URL:** https://faultcodes.org/automotive/obd2-c0014
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers the right front inlet (apply) solenoid valve of the ABS hydraulic modulator, the mirror of C0010 on the right front corner. The module closes this valve to isolate the right front brake circuit and hold wheel pressure during ABS, traction or stability control, then opens it to reapply pressure from the master cylinder or pump. It monitors the coil for opens, shorts to supply or ground and resistance outside the calibrated window. A confirmed electrical fault disables ABS and the stability functions and turns on the ABS warning lamp, with conventional foundation braking unaffected. No manufacturer documents this code publicly; NHTSA's safety study of hydraulic ABS/ESC brakes describes the hold valve used per wheel, and a pump patent shows it as a normally open apply valve.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Normal braking retained

## Most Likely Root Causes
- Inlet valve coil open or shorted
- Harness or connector corrosion
- Internal hydraulic modulator fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Rf Abs Inlet Valve.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Rf Abs Inlet Valve.
5. Clear fault memory and run a verification cycle to confirm C0014 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $113–$771 | $324–$1836 |
| GBP | £89–£607 | £258–£1462 |
| CAD | CA$152–CA$1035 | CA$435–CA$2465 |
| EUR | €105–€714 | €300–€1700 |
| CHF | CHF 121–CHF 821 | CHF 396–CHF 2244 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0014?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0014?
DIY replacement parts average $113–$771, while professional service averages $324–$1836.

### Will resetting C0014 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

