# OBD-II C0004: TCS Control Channel B Valve 2

> **Quick Answer:** OBD-II fault code C0004 indicates TCS Control Channel B Valve 2. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1728.

- **URL:** https://faultcodes.org/automotive/obd2-c0004
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
C0004 completes the set with the second traction control valve of channel B. During an intervention the module closes the isolation valve and opens the priming valve of the circuit concerned so the pump can supply pressure to a wheel that is spinning; afterwards both return to rest so the driver's pedal again acts through the master cylinder. A valve that sticks or a coil that fails can therefore leave the pump without supply or keep the circuit isolated from the pedal, which is why the module reacts at once. It sets the code for an electrical fault or an implausible pressure response, switches off traction and stability control and lights the warning lamp. Base braking stays available. No manufacturer documents this code publicly.

## Common Symptoms
- ABS warning lamp on
- Traction and stability control disabled
- Normal braking retained without ABS

## Most Likely Root Causes
- Solenoid coil open or shorted
- Corroded or chafed wiring to the modulator
- Internal hydraulic modulator fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Tcs Valve B2.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Tcs Valve B2.
5. Clear fault memory and run a verification cycle to confirm C0004 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $113–$726 | $324–$1728 |
| GBP | £89–£571 | £258–£1376 |
| CAD | CA$152–CA$974 | CA$435–CA$2320 |
| EUR | €105–€672 | €300–€1600 |
| CHF | CHF 121–CHF 773 | CHF 396–CHF 2112 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0004?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0004?
DIY replacement parts average $113–$726, while professional service averages $324–$1728.

### Will resetting C0004 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

