# OBD-II B0048: Third Row Right Side Airbag Deployment Control

> **Quick Answer:** OBD-II fault code B0048 indicates Third Row Right Side Airbag Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$972.

- **URL:** https://faultcodes.org/automotive/obd2-b0048
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B0048 is the right-hand counterpart of B0040: the deployment loop of a side airbag for the right seat in a third row. Few vehicles have one, because the third row usually relies on a curtain that reaches back to the D-pillar. Patent literature covers the hardware: Joyson's seatback side module is described for any seating row including the third, and GM's application treats each rear row as a separate system with its own generator that may stay idle when another fires. No manufacturer documents B0048, and NHTSA holds no bulletin with it. For a second-row right side bag, Mitsubishi shows the usual logic under B0038, a fault confirmed after 2 seconds. Airbag lamp on.

## Common Symptoms
- Airbag warning lamp on
- Right third-row occupant may lack side airbag protection
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Poor contact at the third-row right side airbag connector
- Lead damaged by folding, sliding or removing the third-row seat
- Restraint module configured for equipment the vehicle does not have (wrong part or coding)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Third Row Right Side Airbag.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Third Row Right Side Airbag.
5. Clear fault memory and run a verification cycle to confirm B0048 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$408 | $86–$972 |
| GBP | £24–£321 | £69–£774 |
| CAD | CA$41–CA$548 | CA$116–CA$1305 |
| EUR | €28–€378 | €80–€900 |
| CHF | CHF 32–CHF 435 | CHF 106–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0048?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0048?
DIY replacement parts average $30–$408, while professional service averages $86–$972.

### Will resetting B0048 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

