# OBD-II B003B: Second Row Right Frontal Stage 3 Deployment Control

> **Quick Answer:** OBD-II fault code B003B indicates Second Row Right Frontal Stage 3 Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1296.

- **URL:** https://faultcodes.org/automotive/obd2-b003b
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B003B is the third firing element of the right rear-seat frontal airbag. In front airbags Mercedes-Benz uses this third position for the squib that opens a vent valve and lets gas escape (B000313 driver, B001213 passenger); a patent from Breed shows the other option, a third gas chamber with its own igniter that the controller can fire later, for example in a second impact. Which of these a rear bag would use is not published, and no carmaker documents B003B. If it is stored, the module has found the third element out of range in resistance or voltage. Stage 1 and 2 of the same bag report as B0039 and B003A. The airbag lamp stays on.

## Common Symptoms
- Airbag warning lamp on
- Right rear airbag may deploy without its adaptive third stage
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Damaged stage 3 lead or vent squib in the right rear airbag
- Loose or corroded connector of the airbag lead routed through the front seat backrest
- Restraint module configured for equipment the vehicle does not have (wrong part or coding)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Second Row Right Frontal Airbag.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Second Row Right Frontal Airbag.
5. Clear fault memory and run a verification cycle to confirm B003B does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$544 | $108–$1296 |
| GBP | £30–£428 | £86–£1032 |
| CAD | CA$51–CA$731 | CA$145–CA$1740 |
| EUR | €35–€504 | €100–€1200 |
| CHF | CHF 40–CHF 580 | CHF 132–CHF 1584 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B003B?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B003B?
DIY replacement parts average $38–$544, while professional service averages $108–$1296.

### Will resetting B003B fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

