# OBD-II B0028: Right Side Airbag Deployment Control

> **Quick Answer:** OBD-II fault code B0028 indicates Right Side Airbag Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$972.

- **URL:** https://faultcodes.org/automotive/obd2-b0028
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B0028 is the right-hand twin of B0020: the firing loop of the right front side airbag, normally in the outer flank of the passenger seat. Honda asked for parts from 2018-20 Accord and CR-V and from the 2015 TLX that stored B0028-13, an open or raised resistance in the passenger side airbag inflator. FCA traces B0028-13 on the Cherokee and Chrysler 200 to the jumper harness in the seat, and Toyota's 2022 Tundra stored B002811 or B002812 because the wireless phone charger disturbed the module. Mitsubishi confirms a short to ground after 2 seconds. The older GM numbering differs: the 2006 Saab 9-5 and the 9-3 used B0028 for low resistance in the passenger side bag loop, under 1.5 ohms. Airbag lamp on.

## Common Symptoms
- Airbag warning lamp on
- Right front side airbag may not deploy in a side impact
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Poor contact or corrosion at the side airbag connector or jumper harness under or in the seat
- Internal fault in the right seat side airbag inflator
- Lead pinched or stretched by seat adjustment
- Restraint module software reacting to interference (Toyota Tundra 2022)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Right Side Airbag Module.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Right Side Airbag Module.
5. Clear fault memory and run a verification cycle to confirm B0028 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$408 | $86–$972 |
| GBP | £24–£321 | £69–£774 |
| CAD | CA$41–CA$548 | CA$116–CA$1305 |
| EUR | €28–€378 | €80–€900 |
| CHF | CHF 32–CHF 435 | CHF 106–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0028?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0028?
DIY replacement parts average $30–$408, while professional service averages $86–$972.

### Will resetting B0028 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

