# OBD-II B0025: Left Side Deployment Stage 2 Control

> **Quick Answer:** OBD-II fault code B0025 indicates Left Side Deployment Stage 2 Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$1080.

- **URL:** https://faultcodes.org/automotive/obd2-b0025
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
No public J2012 code list contains B0025, and no manufacturer publicly describes a second stage of a left side airbag under this number. The only trace is at General Motors: the Saab 9-4X 2011 manual groups B0025 with the roof rail airbag codes B0016 and B0023 but gives no descriptor for it. Two-stage side airbags are rare in any case. A Ford patent notes that thorax, pelvis and head bags usually have a single inflation setting because of their small size, and the dual-chamber side airbag described by Autoliv divides one cushion into chest and pelvis zones rather than firing twice. If B0025 appears, the descriptor and module name on the scan tool decide what is meant. Airbag lamp on; the affected bag may not deploy.

## Common Symptoms
- Airbag warning lamp on
- Side or curtain protection may be reduced on the affected side
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Open, shorted or high-resistance squib loop of the airbag the module assigns to this code
- Connector or its position lock not fully engaged
- Fault or unsuitable software in the restraint control module

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Driver Side Airbag.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Driver Side Airbag.
5. Clear fault memory and run a verification cycle to confirm B0025 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$454 | $86–$1080 |
| GBP | £24–£357 | £69–£860 |
| CAD | CA$41–CA$609 | CA$116–CA$1450 |
| EUR | €28–€420 | €80–€1000 |
| CHF | CHF 32–CHF 483 | CHF 106–CHF 1320 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0025?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0025?
DIY replacement parts average $30–$454, while professional service averages $86–$1080.

### Will resetting B0025 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

