# OBD-II B0024: Right Side Deployment Control

> **Quick Answer:** OBD-II fault code B0024 indicates Right Side Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $43–$972.

- **URL:** https://faultcodes.org/automotive/obd2-b0024
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B0024 is missing from the public J2012 lists; there the right front side airbag is B0028. General Motors used the number twice. Older modules, such as those of the 2006 Saab 9-5 and the Saab 9-3, assign it to driver frontal stage 1: on the 9-5 the voltage at the module pin leaves the 1.0 to 4.1 volt window for 2 seconds, on the 9-3 the loop is shorted to ground or battery. In 2021 GM listed B0024 01 beside B0017 01 and B001E 01 on Cadillac XT4 to XT6, Blazer, Camaro, Malibu and Acadia as a software fault of the sensing module, pointing to the knee bag and the inboard side bag of the driver seat; new SDM software fixes it (PIT5827, 21-NA-176). A right side airbag meaning is not publicly documented. Airbag lamp on.

## Common Symptoms
- Airbag warning lamp on
- Depending on the vehicle, the driver airbag or a seat side airbag may be affected
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Restraint module software fault on 2021 GM models (PIT5827, 21-NA-176)
- Short to ground or battery in the driver frontal stage 1 loop (older GM/Saab)
- Worn clock spring in the driver airbag loop (older GM/Saab)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Right Side Airbag Module.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Right Side Airbag Module.
5. Clear fault memory and run a verification cycle to confirm B0024 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$408 | $43–$972 |
| GBP | £13–£321 | £34–£774 |
| CAD | CA$22–CA$548 | CA$58–CA$1305 |
| EUR | €15–€378 | €40–€900 |
| CHF | CHF 17–CHF 435 | CHF 53–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0024?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0024?
DIY replacement parts average $16–$408, while professional service averages $43–$972.

### Will resetting B0024 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

