# OBD-II B0017: Right Front/Passenger Frontal Deployment Loop Short to Battery

> **Quick Answer:** OBD-II fault code B0017 indicates Right Front/Passenger Frontal Deployment Loop Short to Battery. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $65–$1296.

- **URL:** https://faultcodes.org/automotive/obd2-b0017
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
None of the public J2012 lists contains B0017 either. In older GM modules (Saab 9-5 2006, Saab 9-3 up to 2011) it marks an open passenger frontal stage 1 loop, set once the loop reads more than roughly 4.5 ohms for two seconds, so the component matches the title but the fault type does not. Later GM vehicles use B0017 with GM's usual fault bytes, where 01 stands for short to battery. On the 2020-22 Acadia, XT4 and related models GM traced B0017 01, together with B0024 01 and B001E 01, to faulty SDM software rather than wiring: the code is cleared and the module reprogrammed (PIT5827, 21-NA-176). The parts named there are the knee airbag and the driver seat inboard side airbag. The airbag lamp is lit.

## Common Symptoms
- Airbag warning lamp on or an OnStar SIR notification without lamp
- Affected airbag stage may be disabled
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- On GM 2020-22 models faulty SDM software, cured by reprogramming (21-NA-176)
- Open passenger frontal stage 1 loop (older GM meaning)
- Squib lead in contact with a powered wire

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Passenger Airbag Module.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Passenger Airbag Module.
5. Clear fault memory and run a verification cycle to confirm B0017 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $23–$544 | $65–$1296 |
| GBP | £18–£428 | £52–£1032 |
| CAD | CA$30–CA$731 | CA$87–CA$1740 |
| EUR | €21–€504 | €60–€1200 |
| CHF | CHF 24–CHF 580 | CHF 79–CHF 1584 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0017?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0017?
DIY replacement parts average $23–$544, while professional service averages $65–$1296.

### Will resetting B0017 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

