# OBD-II B0011: Passenger Frontal Stage 2 Deployment Control

> **Quick Answer:** OBD-II fault code B0011 indicates Passenger Frontal Stage 2 Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1404.

- **URL:** https://faultcodes.org/automotive/obd2-b0011
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B0011 is the passenger counterpart of B0002: it concerns the second inflator stage of the dashboard airbag, which the module adds in severe crashes or fires with a delay. Mercedes-Benz logs B001113 for an open stage 2 squib of the front passenger airbag, and Mitsubishi lists B0011 as passenger airbag module 2. Stage 1 of the same bag has its own code B0010, a third element B0012. Since both stages leave the module through one connector, a code for stage 2 alone usually means a fault in the stage 2 pins, lead or squib rather than a general connector problem. Older GM modules (Saab 9-3 up to 2011) put passenger stage 2 faults under B0012 to B0014 instead. The airbag lamp is on and adaptive inflation for the passenger is lost.

## Common Symptoms
- Airbag warning lamp on
- Passenger airbag loses its second stage for severe crashes
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Poor contact on the stage 2 pins or open stage 2 lead
- Stage 2 squib in the passenger airbag module faulty
- Output stage in the restraint control module faulty

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Passenger Airbag Module.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Passenger Airbag Module.
5. Clear fault memory and run a verification cycle to confirm B0011 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$590 | $108–$1404 |
| GBP | £30–£464 | £86–£1118 |
| CAD | CA$51–CA$792 | CA$145–CA$1885 |
| EUR | €35–€546 | €100–€1300 |
| CHF | CHF 40–CHF 628 | CHF 132–CHF 1716 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0011?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0011?
DIY replacement parts average $38–$590, while professional service averages $108–$1404.

### Will resetting B0011 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

