# OBD-II B0007: Driver Frontal Deployment Loop Short to Battery

> **Quick Answer:** OBD-II fault code B0007 indicates Driver Frontal Deployment Loop Short to Battery. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$1080.

- **URL:** https://faultcodes.org/automotive/obd2-b0007
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Like B0006, this number is absent from the public J2012 lists. FCA uses B0007-11 on the 2025 Ram 1500 for the latch control of the right RamBox stowage lid, again a short to ground in the body control module and cured by the same flash 08-204-24; an airbag meaning is not documented anywhere. The title names a driver airbag loop shorted to battery voltage. Restraint modules treat that as a fault type of the stage code: GM sets B0012 01 or B0013 01 on the Saab 9-4X when the steering wheel airbag loop sits at supply voltage for two seconds. A short to positive is the more dangerous case because a further fault could energise the squib, so modules usually disable the affected stage and light the lamp. Confirm the storing module before any repair.

## Common Symptoms
- Airbag warning lamp on, affected stage disabled by the module
- On Ram 1500 2025 right stowage lid inoperative
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- On Ram 1500 2025 the code belongs to the right stowage lid latch circuit of the body module
- Squib lead touching a powered wire in the column or steering wheel harness
- Moisture bridging pins in a connector of the airbag circuit

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Driver Airbag Module.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Driver Airbag Module.
5. Clear fault memory and run a verification cycle to confirm B0007 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$454 | $86–$1080 |
| GBP | £24–£357 | £69–£860 |
| CAD | CA$41–CA$609 | CA$116–CA$1450 |
| EUR | €28–€420 | €80–€1000 |
| CHF | CHF 32–CHF 483 | CHF 106–CHF 1320 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0007?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0007?
DIY replacement parts average $30–$454, while professional service averages $86–$1080.

### Will resetting B0007 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

