# OBD-II B0002: Driver Frontal Stage 2 Deployment Control

> **Quick Answer:** OBD-II fault code B0002 indicates Driver Frontal Stage 2 Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1296.

- **URL:** https://faultcodes.org/automotive/obd2-b0002
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Dual-stage driver airbags hold a second charge that the restraint module fires only in severe crashes or after a short delay, so the cushion fills harder or for longer; a Nissan patent bases that choice on the change in vehicle speed and belt use. B0002 flags a fault in the firing loop of this second stage. Land Rover documents B0002-13 as an open stage 2 circuit on the Evoque, which also appeared after a module replacement had loaded older software (SSM 74577). Mercedes-Benz, Mitsubishi and FCA list it as the driver squib or module 2, GM as stage 2 of the steering wheel module. Because both stages share connector and clock spring, B0002 often comes together with B0001; alone it points to the stage 2 lead or squib. Adaptive inflation is lost and the airbag lamp is on.

## Common Symptoms
- Airbag warning lamp on
- Driver airbag loses its second, high-severity stage
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Open stage 2 squib lead at the airbag module connector
- Stage 2 track in the clock spring broken
- Replacement restraint module loaded with unsuitable software (Land Rover SSM 74577)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Driver Airbag Module.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Driver Airbag Module.
5. Clear fault memory and run a verification cycle to confirm B0002 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$544 | $108–$1296 |
| GBP | £30–£428 | £86–£1032 |
| CAD | CA$51–CA$731 | CA$145–CA$1740 |
| EUR | €35–€504 | €100–€1200 |
| CHF | CHF 40–CHF 580 | CHF 132–CHF 1584 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0002?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0002?
DIY replacement parts average $38–$544, while professional service averages $108–$1296.

### Will resetting B0002 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

