# Dodge P0138: HO2S12 High Voltage

> **Quick Answer:** Dodge fault code P0138 indicates HO2S12 High Voltage. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $130–$518.

- **URL:** https://faultcodes.org/automotive/dodge-p0138
- **Category:** Automotive & OBD-II
- **Brand / Standard:** Dodge
- **System Area:** Fuel Trim & Air/O2 Metering
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Manufacturer-specific Dodge diagnostic trouble code P0138: HO2S12 High Voltage.

## Common Symptoms
- Warning indicator or active diagnostic code P0138
- Irregular behavior in Fuel Trim & Air/O2 Metering

## Most Likely Root Causes
- Faulty sensor or actuator in Fuel Trim & Air/O2 Metering
- Damaged, corroded, or loose wiring harness connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Fuel Trim & Air/O2 Metering.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Fuel Trim & Air/O2 Metering.
5. Clear fault memory and run a verification cycle to confirm P0138 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $45–$218 | $130–$518 |
| GBP | £36–£172 | £103–£413 |
| CAD | CA$61–CA$293 | CA$174–CA$696 |
| EUR | €42–€202 | €120–€480 |
| CHF | CHF 48–CHF 232 | CHF 158–CHF 634 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0138?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair P0138?
DIY replacement parts average $45–$218, while professional service averages $130–$518.

### Will resetting P0138 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

