# Audi P0706: Defective Transmission Range Sensor (PRNDL input), Defective Transmission Range Sensor (PRNDL input) wiring or connector, Defective Valve Body, Defective manual shift valve linkage, Dirty transmission fluid that restricts the hydraulic passages

> **Quick Answer:** Audi fault code P0706 indicates Defective Transmission Range Sensor (PRNDL input), Defective Transmission Range Sensor (PRNDL input) wiring or connector, Defective Valve Body, Defective manual shift valve linkage, Dirty transmission fluid that restricts the hydraulic passages. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $378–$2592.

- **URL:** https://faultcodes.org/automotive/audi-p0706
- **Category:** Automotive & OBD-II
- **Brand / Standard:** Audi
- **System Area:** Transmission & Drivetrain
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Manufacturer-specific Audi diagnostic trouble code P0706: Defective Transmission Range Sensor (PRNDL input), Defective Transmission Range Sensor (PRNDL input) wiring or connector, Defective Valve Body, Defective manual shift valve linkage, Dirty transmission fluid that restricts the hydraulic passages.

## Common Symptoms
- Warning indicator or active diagnostic code P0706
- Irregular behavior in Transmission & Drivetrain

## Most Likely Root Causes
- Faulty sensor or actuator in Transmission & Drivetrain
- Damaged, corroded, or loose wiring harness connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Transmission & Drivetrain.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Transmission & Drivetrain.
5. Clear fault memory and run a verification cycle to confirm P0706 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $132–$1089 | $378–$2592 |
| GBP | £104–£857 | £301–£2064 |
| CAD | CA$177–CA$1462 | CA$508–CA$3480 |
| EUR | €122–€1008 | €350–€2400 |
| CHF | CHF 140–CHF 1159 | CHF 462–CHF 3168 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0706?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0706?
DIY replacement parts average $132–$1089, while professional service averages $378–$2592.

### Will resetting P0706 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

