# Audi P0600: Defective PCM (Power Train Control Module), Defective PCM data bus wiring/connections, Defective PCM data bus ground circuit(s), Defective PCM or other control module controlled output devices, Defective CAN bus communication

> **Quick Answer:** Audi fault code P0600 indicates Defective PCM (Power Train Control Module), Defective PCM data bus wiring/connections, Defective PCM data bus ground circuit(s), Defective PCM or other control module controlled output devices, Defective CAN bus communication. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $130–$594.

- **URL:** https://faultcodes.org/automotive/audi-p0600
- **Category:** Automotive & OBD-II
- **Brand / Standard:** Audi
- **System Area:** Powertrain & Engine Management
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Manufacturer-specific Audi diagnostic trouble code P0600: Defective PCM (Power Train Control Module), Defective PCM data bus wiring/connections, Defective PCM data bus ground circuit(s), Defective PCM or other control module controlled output devices, Defective CAN bus communication.

## Common Symptoms
- Warning indicator or active diagnostic code P0600
- Irregular behavior in Powertrain & Engine Management

## Most Likely Root Causes
- Faulty sensor or actuator in Powertrain & Engine Management
- Damaged, corroded, or loose wiring harness connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Powertrain & Engine Management.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Powertrain & Engine Management.
5. Clear fault memory and run a verification cycle to confirm P0600 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $45–$249 | $130–$594 |
| GBP | £36–£196 | £103–£473 |
| CAD | CA$61–CA$335 | CA$174–CA$798 |
| EUR | €42–€231 | €120–€550 |
| CHF | CHF 48–CHF 266 | CHF 158–CHF 726 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0600?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair P0600?
DIY replacement parts average $45–$249, while professional service averages $130–$594.

### Will resetting P0600 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

