# Audi P0128: Defective Engine Thermostat, Defective Engine Coolant Temperature Sensor, Defective Intake Air Temperature Sensor, Defective Cooling System, Low Engine Coolant, Dirty Engine Coolant causing incorrect Coolant Temperature Sensor readings, Defective/always running Engine Cooling fan(s)

> **Quick Answer:** Audi fault code P0128 indicates Defective Engine Thermostat, Defective Engine Coolant Temperature Sensor, Defective Intake Air Temperature Sensor, Defective Cooling System, Low Engine Coolant, Dirty Engine Coolant causing incorrect Coolant Temperature Sensor readings, Defective/always running Engine Cooling fan(s). Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $119–$454.

- **URL:** https://faultcodes.org/automotive/audi-p0128
- **Category:** Automotive & OBD-II
- **Brand / Standard:** Audi
- **System Area:** Engine Cooling & Thermostat
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Easy (Basic Tools)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Manufacturer-specific Audi diagnostic trouble code P0128: Defective Engine Thermostat, Defective Engine Coolant Temperature Sensor, Defective Intake Air Temperature Sensor, Defective Cooling System, Low Engine Coolant, Dirty Engine Coolant causing incorrect Coolant Temperature Sensor readings, Defective/always running Engine Cooling fan(s).

## Common Symptoms
- Warning indicator or active diagnostic code P0128
- Irregular behavior in Engine Cooling & Thermostat

## Most Likely Root Causes
- Faulty sensor or actuator in Engine Cooling & Thermostat
- Damaged, corroded, or loose wiring harness connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Engine Cooling & Thermostat.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Engine Cooling & Thermostat.
5. Clear fault memory and run a verification cycle to confirm P0128 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $42–$190 | $119–$454 |
| GBP | £33–£150 | £95–£361 |
| CAD | CA$57–CA$255 | CA$160–CA$609 |
| EUR | €39–€176 | €110–€420 |
| CHF | CHF 45–CHF 202 | CHF 145–CHF 554 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0128?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0128?
DIY replacement parts average $42–$190, while professional service averages $119–$454.

### Will resetting P0128 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

